Subaru Oil Filter Anti-Drain Adapter SS-101-BK

Installation Instructions:
For use on FA20 and FB20 Engines w/o factory oil cooler

Step 1

Remove oil filter.

Step 2

Install adapter without base seal O-ring. Torque to 30 ft.lbs. using 1 ¼” Deep Socket.

Step 3

Establish port to be utilized for air valve.

Step 4

Remove adapter.
Install hex plugs in two ports not utilized.

Step 5

 Install Viton O-ring and lubricate with oil. Torque to 30 ft.lbs. using 1 ¼” Deep Socket.

Step 6

Install air valve.

Step 7

Install appropriate size oil filter that contains M22x1.5 threads. Subaru oil filters will not fit this adapter.

Prior to servicing for oil and filter change, apply compressed air with air chuck for 3 seconds, this will evacuate oil filter for easy and clean oil filter removal.

Baxter Performance is excited to offer theSubaru Oil Filter Anti-Drain Adapter SS-101-BK for FA20 and FB20 Engines w/o factory oil cooler. This simple and effective component can reduce engine-wear caused by dry starts and help extend the life of your vehicle. Contact us today with any questions, and order yours from Baxter Performance!

Shop Now

PDF Instructions

Subaru SS-101-BK Anti-Drain Oil Filter Adapter Installation Instructions

- View Fullscreen -